Troneer Auto Accessories

- -

Spectrum Analyser HM-5010

HM5010 spectrum analyzer can carry out good inspection to the faults of cable system and wireless system including remote control, cordless phone, cable TV and communication equipment, as well as good comparison and analysis to frequency of signals.

HM5010 spectrum analyzer can test mobile phone, RF circuits, for example, control signal of logic circuit, baseband signal; local oscillator signal of RF circuit, IF signal and transmission signal, It is very quick and accurate to use HM5010 spectrum analyzer to overhaul the fault of mobile phone which can not enter the network, and determine the fault point.

Electromagnetic Compatible (EMC) Testing: measure the function of harmful electromagnetic wave to be transmitted by various electronic equipments. In addition, it can output AM / FM demodulation signal from socket PHONE, identify the broadcast signal affected by noise. From authorization aspect, it is very effective measurement function for the evaluation and research in advance to carry out the measurement of radioactive noise.

Widely used for production, development, education and scientific research. True form of signal (such as RF pulse signal) can be observed from Yamada spectrum analyzer clearly, where figures are expanded by Fourier series, good for apprehend in education and research.

Frequency range: 0.15--- 1050 MHz          

Center frequency display accuracy: +/-100KHz

Marker accuracy: (0.1% span +100KHz)       

Resolution of frequency display: 100kHz (4.5 digit LED)

Frequency scanwidth accuracy: +/-10%       

Frequency stability: better than 150 KHz/ hour

IF Bandwidth (-3dB): 400 KHz and 20 KHz;    

Video-Filter (ON): 4 KHz

Sweep rate: 43Hz                         

Amplitude range: -100dBm to +13 dBm

Screen display range: 80 dB (10dB/div.)       

Reference level:-27dBm to +13 dBm (in 10dB steps)

Reference level accuracy: +/-2dB           

 Average noise level: -90dBm (20 kHz Bandwidth)

Distortion: < -55 dBm of 2nd and 3rd harmonic   

Third order intermod.:-70dBm (two signals > 3MHz apart)

Sensitivity: Better than -90dBm              

Log scale fidelity: +/-2dB (without attn.) 500MHz

Input attenuator: 0 to 40 dB (4 x 10dB steps)   

Input attenuator accuracy: +/-1dB/10dB

Max. input level: +10dBm, +/-25V DC (0dB attn.) +20dBm (40dB attn.)

Frequency scan width: 100 KHz/div. to 100MHz/div., in 1-2-5 steps and 0Hz/div.(Zero Scan)

 

For any enquiry: please click here